Panasonic HDC-TM350 Operating Instructions Manual Download Page 21

Page: 21 / 151

VQT2H62

Preparation

Setup

Selecting a mode
(Turning the unit on/off)

Change the mode to recording, playback or power OFF.

Turn on the power by changing the mode to

while pressing

the lock release button

The status indicator

lights.

To turn off the power

Change the mode to OFF.
The status indicator goes off.

When the mode is set to

, the power can be turned on and off with the LCD monitor and

the viewfinder.
Open the LCD monitor or extend the viewfinder to turn on the unit.

≥

The power will not turn off unless the LCD monitor is closed and the viewfinder is retracted.

≥

The power will not turn off while recording motion pictures even if the LCD monitor is closed and the
viewfinder is retracted.

∫

To turn on the power

The status indicator

lights.

∫

To turn off the power

The status indicator goes off.

Motion picture recording mode (

39)

Still picture recording mode (

43)

Playback mode (

74, 81)

OFF

Turning the power on and off with the LCD monitor/viewfinder

≥

Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.

≥

Align with the mark

≥

Status indicator

Change the mode to OFF when this unit is not being used.

Summary of Contents for HDC-TM350
























































































































































Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands

Panasonic HDC-TM350, Operating Instructions Manual

Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands