Panasonic HDC-TM350 Operating Instructions Manual Download Page 121

Page: 121 / 151

120

VQT2H62

With a PC

Setup

Connecting to a PC

≥

Connect this unit to the PC after the software applications are installed.

≥

Remove the supplied CD-ROM from your PC.

USB cable (supplied)

Connect this unit to the AC
adaptor.

≥

It is possible to use it connected to the PC with
the batteries only.

Turn on the unit.

≥

This function is available in all modes.

Connect this unit to a PC.

The USB function selection screen will appear.

≥

Insert the USB connectors as far as they will
go.

≥

Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)

Touch [PC].

≥

The Smart wizard screen is automatically
displayed when HD Writer AE 1.5 is installed.

≥

This unit is automatically recognised as an
external drive of the PC. (

122)

≥

When you select an option other than [PC],
reconnect the USB cable.

≥

When the unit is connected to a PC its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.

≥

Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon (

) appears on the unit screen.

≥

Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or Built-in
memory access icon (

) appears on the unit

screen.

Summary of Contents for HDC-TM350
























































































































































Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands

Panasonic HDC-TM350, Operating Instructions Manual

Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands