Panasonic HDC-TM350 Operating Instructions Manual Download

Page: 20 / 151

VQT2H62

Caution:
When the SD card is removed while the access lamp is lit, this unit may malfunction or the data
recorded on the SD card may be lost.

Open the LCD monitor.

≥

Check that the access lamp has gone off.

Open the SD card cover by
sliding the OPEN lever

Insert/remove the SD card.

≥

Face the label side

in the direction shown in

the illustration and press it straight in as far as
it will go.

≥

Press the centre of the SD card and then pull it
straight out.

Securely close the SD card cover.

≥

Securely close it until it clicks.

≥

Do not touch the terminals on the back of the
SD card.

≥

Do not apply strong shocks, bend, or drop the
SD card.

≥

Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.

≥

When the card access lamp is lit, do not:

Remove the SD card

Turn the unit off

Insert and remove the USB cable

Expose the unit to vibrations or shock

Performing the above while the lamp is on may
result in damage to data/SD card or this unit.

≥

Do not expose the terminals of the SD card to
water, garbage or dust.

≥

Do not place SD cards in the following areas:

In direct sunlight.

In very dusty or humid areas.

Near a heater.

Locations suscept ble to significant
difference in temperature (condensation can
occur).

Where static electricity or electromagnetic
waves occur.

≥

To protect SD cards, return them to their cases
when you are not using them.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (

93) When the SD card is formatted, all of the recorded data

is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc
etc. before proceeding with the formatting. (

102, 113)

OPEN

Access lamp [ACCESS]

≥

When this unit is accessing the SD card or
built-in memory, the access lamp lights up.

Summary of Contents for HDC-TM350
























































































































































Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands

Panasonic HDC-TM350, Operating Instructions Manual

Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands