Panasonic HDC-TM350 Operating Instructions Manual Download Page 88

Page: 88 / 151

VQT2H62

Playback

Editing

Protecting scenes/still
pictures

Scenes/still pictures can be protected so that they are not deleted by mistake.

(Even if you protect some scenes/still pictures, formatting the media will delete them.)

Change the mode to

Select the menu. (

22)

Touch the scene/still picture to
be protected.

≥

When touched, the scene/still picture is
selected and the

indication appears on the

thumbnails. Touch the scene/still picture again
to cancel the operation.

≥

Press the MENU button to complete the
settings.

≥

When [INTEL. SCENE] is selected while
playing back motion pictures, scenes cannot
be protected.

[VIDEO SETUP] or [PHOTO SETUP]

[SCENE PROTECT]

[YES]

Summary of Contents for HDC-TM350
























































































































































Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands

Panasonic HDC-TM350, Operating Instructions Manual

Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands