Panasonic HDC-TM350, Operating Instructions Manual

Page: 12 / 151

11
VQT2H62
12 Adjust zoom buttons (
l
50)
≥
These buttons function in the same manner as
the zoom lever. Changing the thumbnail display
and adjusting the volume can be operated.
13 Menu button [MENU] (
l
22)
14 Delete button [ ] (
l
84)
15 SD card open lever [OPEN] (
l
19)
16 Audio-video output terminal [A/V]
(
l
94, 109)
≥
Use the AV cable (only the supplied cable).
17 Component terminal [COMPONENT] (
l
94)
18 HDMI mini connector [HDMI] (
l
94, 99)
19 Access lamp [ACCESS] (
l
9, 19)
20 Card slot (
l
19)
21 SD card cover (
l
19)
22 Lens cover
≥
The lens cover opens in motion picture
recording mode or still picture recording
mode. (
l
20)
23 Multi manual ring (
l
69, 72)
24 Speaker
25 Manual focus button [FOCUS] (
l
72)
26 Manual function button [FUNCTION] (
l
73)
27 Remote control sensor (
l
34)
28 Recording lamp (
l
25)
29 Built-in flash (
l
56)
30 Lens (LEICA DICOMAR)
31 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot
B
,
and then rotate it clockwise C .
≥
Attach the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) in front of the
lens hood.
≥
When fitting the tele conversion lens
(VW-T4314H; optional) or the wide conversion
lens (VW-W4307H; optional), first remove the
lens hood.
32 AF assist lamp (
l
67)
22 23
24
25
26
27
28
31
32
29 30
Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the
4 corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF43NE; optional))
≥
When the filter kit (VW-LF43NE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
≥
To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.