Panasonic HD-PLC DA-PU100, Administrator'S Manual

Page: 6 / 67

DA-PU100 Series Administrator's Manual
6
1.3 Available tools
The following three tools are available to support efficient work during new installation, maintenance,
and operation monitoring of the PLC adaptor.
No. Tool When Abstract
1 Setting Tool New installation Performs parameter settings of multiple PLC adaptors
in batch during initial installation.
2 Maintenance Tool Maintenance Confirms communication status during installation and
operation.
Changing parameter settings and firmware updating is
also possible.
3 Monitoring Tool Operation
monitoring
Notifies when an error occurs in the PLC adaptor.
It is possible to output the status of the PLC adaptor
as a log.
Setting Tool Maintenance Tool Monitoring Tool
・
A maximum of 1,024 units can be
collectively set with a csv file(shared
key, IP address etc.)
・
Sequential setting by a csv file.
・
Confirms connection status
・
Analysis during comm. failure
・
Detects lost unit reliably by
comparison with initial settings
・
Notifies by e-mail or alert when
disconnected or speed reduced
・
Automatic recording of abnormal
situations