DA-PU100 Series Administrator's Manual
27
3.1
Setting Tool
By setting multiple PLC adaptors collectively, you can perform the setting work efficiently.
Based on the setting data created in Excel etc. beforehand, it supports writing to one unit and writing
to multiple units in operation.
The screen configuration of the HD-PLC setting tool is described below.
(1) File menu
･
Load and save the HD-PLC setting information file (CSV format).
And then exit the application.
(2) Edit menu
･
Add lines, delete lines, and bulk edit.
(3) Write setup information button
･
Writes the HD-PLC setting information in the setting tool to the PLC adaptor.
(4) Read setup information button
･
Loads the setting information in the PLC adaptor into the setting tool.
(5) Basic tab
･
Displays the
basic setting information of HD-PLC.
(6) IPv4 tab
･
Displays the IPv4 setting information of HD-PLC.
(7) IPv6 tab
･
Displays the IPv6 setting information of HD-PLC.
(8) RS485 tab
･
Displays the RS485 setting information of HD-PLC.
(9) Security tab
･
Displays the security setting information of HD-PLC.
(10)
Tab setting information display field
･
Displays and inputs the setting information of each selected tab.
(11) Control panel
･
Performs firmware update of the selected HD-PLC.
（
1
）
（
2
）
（
4
）
（
3
）
（
5
）
（
6
）
（
9
）
（
7
）
（
8
）
（
11
）
（
10
）
Summary of Contents for HD-PLC DA-PU100
