Panasonic HC-VX870 Page 182 Owner'S Manual Download

Page: 182 / 246

- 182 -

Press Wi-Fi button on this unit and touch [Wi-Fi Setup].

Touch [Direct Connection].

Touch [Change connection type].

Touch [WPS Connection].

Set the smartphone to WPS Mode.

Press Wi-Fi button on this unit and touch [Wi-Fi Setup].

Touch [Direct Connection].

Touch [Change connection type].

Touch [QR code].

≥

QR code is displayed on the screen of this unit.

Start up the smartphone application “Image App”.

On the smartphone, select [QR code], and scan the QR code displayed on the
screen of this unit.

≥

When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations. (

147

)

≥

When using an iOS device, perform the following operations:

Select the option that allows you to install the app on the profile screen of the “Image App”, and
follow the on-screen instructions to complete the installation.

Press the home button to close the displayed screen.

Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.

≥

When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.

[WPS Connection]

Confirming that the Wi-Fi connection is complete

The status indicator of this unit is lit green

is displayed on the screen

Connecting with QR code

Confirming that the Wi-Fi connection is complete

The status indicator of this unit is lit green

is displayed on the screen

Summary of Contents for HC-VX870























































































































































































































































Search results

Summary of Contents for HC-VX870

Reviews:

Related manuals for HC-VX870

Brands by name

Popular brands

Panasonic HC-VX870, Owner'S Manual

Search results

Summary of Contents for HC-VX870

Reviews:

Related manuals for HC-VX870

Brands by name

Popular brands