Panasonic HC-VX870 Owner'S Manual Download

Page: 244 / 246

- 244 -

When the Remote Pan Tilt Cradle is connected to this unit, the Remote Pan Tilt Cradle setup menu
can be set.

≥

Connecting the Remote Pan Tilt Cradle to this unit (

238

)

Touch [SETUP] in the Remote Pan Tilt Cradle Mode screen.

Touch desired menu item.

Set the left/right pan range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object].

Set the up/down tilt range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object].

Set the up/down operation speed of the Remote Pan Tilt Cradle.

You can confirm the operating range of the Remote Pan Tilt Cradle set for [Party Scene]/[Moving
Object].

≥

The Remote Pan Tilt Cradle moves in the ranges set at [Panning Angle] and [Tilt Angle].

≥

When the confirmation operation is finished, the Remote Pan Tilt Cradle returns to its home
position.

The firmware version of the Remote Pan Tilt Cradle is displayed.

Remote Pan Tilt Cradle settings

[Panning Angle]

[±180°]/[±90°]/[±45°]/[Stationary]

[±180°]:

Pans to the left/right up to approx. 180

[±90°]:

Pans to the left/right up to approx. 90

[±45°]:

Pans to the left/right up to approx. 45

[Stationary]:

Panning to the left/right is off.

[Tilt Angle]

[±15°]/[Stationary]

[±15°]:

Tilts up/down up to approx. 15

[Stationary]:

Tilting up/down is off.

[Tilt Speed]

[High]/[Normal]

[Pan/Tilt Check]

[Firmware Version Info]

Summary of Contents for HC-VX870























































































































































































































































Search results

Summary of Contents for HC-VX870

Reviews:

Related manuals for HC-VX870

Brands by name

Popular brands

Panasonic HC-VX870, Owner'S Manual

Search results

Summary of Contents for HC-VX870

Reviews:

Related manuals for HC-VX870

Brands by name

Popular brands