- 160 -
Refer to [Help] in the “Image App” menu about how to operate.
What you can operate/set with a smartphone during home monitoring
∫
What you can operate with a smartphone
Confirm the condition inside the house
The monitoring video can be confirmed.
≥
The monitoring image can be recorded as a video or a still picture.
≥
It cannot be confirmed with multiple smartphones simultaneously.
≥
Depending upon the environment in which the device is used, motion picture may be like a
frame rate is low.
Voice message
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
≥
You can talk up to 10 seconds in 20 second interval.
≥
Open the LCD monitor of this unit when using the Voice message function.
∫
What you can set with a smartphone
Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in the home monitoring detection area.
≥
Once this unit is set to home monitoring (home monitoring standby state), it cannot detect
moving objects for up to 5 minutes.
≥
Detection of some moving and stationary subjects may not be possible due to the condition of
the subject. Check beforehand to see if detection of the moving or stationary object can be
detected.
≥
If the movement of the subject is too fast or too slow, if the subject is too small, or if the
surroundings are too dark, detection of moving and stationary objects may be impossible.
Automatic recording
You can record a motion picture on this unit as it detects a moving or non-moving object.
≥
Automatic recording will record for approximately 30 seconds.
≥
Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the remaining
available recording time.
≥
When automatic recording is performed with moving object detection, automatic recording is
performed only once within the set time.
≥
When automatic recording is performed with non-moving object detection, the set time will be
reset and non-moving object detection will start again.
