Panasonic HC-VX870 Owner'S Manual Download

Page: 222 / 246

- 222 -

About recovery

If faulty management information is found, the messages may appear and a repair is performed.
(Repairing may take time depending on the error.)

≥

is displayed when abnormal management information is detected when the scenes are

displayed in thumbnail.

≥

Use a sufficiently charged battery or the AC adaptor.

≥

Depending on the condition of the data, it may not be possible to completely repair the data.

≥

If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.

≥

When data recorded on another device is recovered, it may not be possible to play back the data
on this unit or the other device.

≥

If recovery fails, turn the unit off and on again after waiting a while. If recovery fails repeatedly,
format a media on the unit. Please be aware that if a media is formatted, then all the data
recorded on the media will be erased.

≥

If the thumbnail information is recovered, displaying the thumbnails may become slower.

≥

You cannot recover information on scenes recorded as Backup for Twin Camera and Highlight
Playback scenes in MP4 format.

Summary of Contents for HC-VX870























































































































































































































































Search results

Summary of Contents for HC-VX870

Reviews:

Related manuals for HC-VX870

Brands by name

Popular brands

Panasonic HC-VX870, Owner'S Manual

Search results

Summary of Contents for HC-VX870

Reviews:

Related manuals for HC-VX870

Brands by name

Popular brands