Panasonic H-55LFV60U, Operating Instructions Manual

Page: 65 / 104

65
English
[Normal]:
Switches to the backup input if an interruption of
video occurs.
The backup video signal does not need to be in the
same format as the (main) input in use for viewing.
Upon switching to the backup input, the video and
audio adjustment values for the backup input will
be used.
■
Backup input (Quick)
Promptly switches to the backup input if an
interruption of video occurs, and enables switching
between digital (HDMI1 / HDMI2 / DVI-D) inputs.
Note
● The backup video signal needs to be in the same
format as the (main) input in use for viewing.
● Upon switching to the backup input, the video and
audio adjustment values for the (main) input used for
viewing will be inherited.
[Primary backup input]
Sets the first priority backup input.
(None) / [HDMI1] / [HDMI2] / [DVI-D]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Secondary backup input]
Sets the second priority backup input.
(None) / [HDMI1] / [HDMI2] / [DVI-D]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
[Changing mode]
Select speed of input switching.
[High speed]:
If switching between the same signal formats, it is
possible to switch within 1 second.
If switching between the different signal formats,
picture noise is caused.
[Normal speed]:
If switching between the same signal formats, it is
possible to switch within 2 seconds.
If switching between the different signal formats, it
takes 3 to 4 seconds to switch but picture noise is
not caused.
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
Main
HDMI1
HDMI2
DVI-D
PC
COMPONENT *
VIDEO
USB
Backup
HDMI1
HDMI2
DVI-D
○ × ×
PC
COMPONENT
*
VIDEO
× × ×
USB × × ×
○: Selectable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
* : [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-in
select]. (see page 47)
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
16:9
Main input
Backup OK