Panasonic H-55LFV60U, Operating Instructions Manual

Page: 61 / 104

61
English
Function button settings
Assigns specific functions to the numeric buttons (<0>
to <9>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with .
[Function button settings] - submenu screen
VIDEO
USB
---
---
---
PC
DVI-D
HDMI2
HDMI1
COMPONENT
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guide
Input
On
Function button 7
Function button 8
Function button 9
Function button 0
Input
↓
Memory load
↓
Shortcut
2
Select the numeric button with
and set the function to assign with
.
■
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[HDMI1] / [HDMI2] / [DVI-D] / [PC] /
[COMPONENT] * / [VIDEO] / [USB]
*
: [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-
in select]. (see page 47)
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 44)
[MEMORY1] to [MEMORY8]
●
[MEMORY1] to [MEMORY8] load functions are
already assigned to <1> to <8> respectively.
These settings cannot be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings],
[Multi display settings]
● Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
●
Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except power button.
[Digital zoom]
●
Switches to [Digital zoom] mode by pressing
numeric buttons. (see page 34)
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input]
[Memory
load]
[Shortcut]
1 HDMI1 MEMORY1 [Signal]
2 HDMI2 MEMORY2 [Screensaver]
3 DVI-D MEMORY3 [Set up timer]
4 PC MEMORY4
[Power
management
settings]
5 COMPONENT MEMORY5 [Network settings]
6 VIDEO MEMORY6 [AV mute]
7 USB MEMORY7 [Multi display
setting]
8 – MEMORY8 [Digital zoom]
9 – – –
0 – – –
■
[Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
● When <FUNCTION GROUP> is pressed, [Function
button guide] will be displayed regardless of the [On]
/ [Off] settings.