67
English
Note
●
When [Input search] is not set to [Off], this menu will
be greyed out and cannot be set. (see page 64)
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
16:9
Backup mode OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
16:9
Primary backup input
When the conditions for the Backup Input function
are met, the following screen is displayed.
Backup mode OK
Audio input select
Set up the sound when a video input is selected.
1
Select the video input with .
Set the audio input with .
HDMI1
HDMI2
DVI-D
PC
COMPONENT
VIDEO
AUDIO2 IN
AUDIO2 IN
AUDIO1 IN
AUDIO1 IN
HDMI2
HDMI1
Audio input select
●
The illustration above shows the factory settings.
Video input
Audio input
HDMI1
HDMI1 / AUDIO1 IN /
AUDIO2 IN / No audio
HDMI2
HDMI2 / AUDIO1 IN /
AUDIO2 IN / No audio
DVI-D / PC /
COMPONENT
*
/
VIDEO
AUDIO1 IN / AUDIO2 IN /
No audio
No audio: No audio input (Mute)
*
: [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-in
select]. (see page 47)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
HDMI1
16:9
AUDIO1 IN
Onscreen display
Set to display / hide the following Onscreen display.
●
Power on display
●
Input signal switch display
●
No signal display
●
MUTE display after displaying the menu screen
●
Off timer remaining time display when 3 minutes
remaining
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
