53
English
Colour matching function
Corrects unevenness of colours among multiple
screens. R (red), G (green), B (blue) and intermediate
colours (cyan, magenta and yellow) are corrected
individually on each display.
Note
●
When displaying still picture with USB input (USB
media player), it does not have an effect on the
picture.
[Colour matching function] - submenu screen
2048
0
0
Colour matching function
Select colour
Red
Off
Testpattern
Green
Blue
Reset
Red
[Select colour]
Select the colour to correct with .
[Testpattern]
[On]:
Displays the test pattern of the selected colour.
(The sound is muted.)
[Off]:
Displays the normal input signals.
[Red]
Finely adjusts the intensity of red component.
0 to 1023 or 1024 to 2048
[Green]
Finely adjusts the intensity of green component.
0 to 1023 or 1024 to 2048
[Blue]
Finely adjusts the intensity of blue component.
0 to 1023 or 1024 to 2048
[Reset]
Restores each adjustment of all colour selections
to default.
Select [Yes] with and press <ENTER>.
■
To restore each adjustment of the selected
colour to default
Press <DEFAULT> while the menu is displayed, then
each adjustment of the selected colour is restored to
default.
Screensaver
(For preventing image retention)
Do not display a still picture, especially in 4:3 mode, for
any length of time.
If the display must remain on, a Screensaver should be
used.
Screensaver
Start
10:00
Mode
Off
THURSDAY
2015/01/01
■
Screensaver settings
Screensaver operation
When the Screensaver is operating, the following 5
patterns are displayed full screen for 5 seconds each,
and it will be repeated.
Black → Dark grey → Grey → Light grey → White →
Light grey → Grey → Dark grey
To start Screensaver now
Select [On] in [Mode].
Select [Start] and press <ENTER>.
●
The menu screen will disappear and the
Screensaver will be activated.
Screensaver
Start
10:00
Mode
On
THURSDAY
2015/01/01
Note
●
If the following buttons are pressed while the screen
saver is operating, the screen saver is cancelled.
Remote control: <RETURN>
Main unit: <MENU (Unit)> <INPUT> <+ (Unit)>
<- (Unit)> <ENTER (Unit)>
●
When the display is turned off, the Screensaver will
be deactivated.
To set interval of Screensaver
Select [Interval] in [Mode].
Set [Periodic time].
●
Press to change the time by 15 minutes.
●
In [ENGLISH(US)] OSD language, [Periodic time]
is displayed as [SHOW DURATION].
Set [Operating time].
●
Press once to change the time by 1 minute.
Keep pressing down to change the time by 15
minutes.
●
In [ENGLISH(US)] OSD language, [Operating
time] is displayed as [SAVER DURATION].
