Panasonic FP-D350 User Manual Download Page 51

Page: 51 / 663

2-14

Manual supply of toner

• The toner in the developer unit can be manually increased by supplying toner

from the toner hopper to the developer unit to get higher copy density.

To manually supply toner: Choose "Toner supply" in the "User mode".

In so doing, approx. 2.4 g is supplied to the developer mixing unit.

However, when toner density is higher than the predetermined level, toner will

not be supplied.

<CPU>

Sensor output

Gain adjustment

Sensor Area

TDSN

TDREF

GND

TDSN

CN3

TDREF

GND

(Reference 1) Toner supply route

(Reference 2) Forced toner supply

Reserve tank (hopper)

Developer unit

Bottle

Supply toner: supply for 6.7 seconds from reserve tank.
(amount of toner supply: approx. 1.1 g)

Rotate bottle for 7 seconds: supply toner to reserve tank.
(Toner is not supplied to developer unit.)

Perform twice.

Note: Bottle rotation means toner is being added to the reserve tank, not the

developer unit. Therefore, the number of bottle rotations can not be used as

a check of proper TDC adjustment.

Summary of Contents for FP-D350
























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FP-D350

Reviews:

Related manuals for FP-D350

Brands by name

Popular brands

Panasonic FP-D350, User Manual

Search results

Summary of Contents for FP-D350

Reviews:

Related manuals for FP-D350

Brands by name

Popular brands