manualshive.com logo in svg

Panasonic FP-D350, User Manual

Share
Download
Panasonic FP-D350 User Manual Download Page 104

3-31

Preventive

Maintenance

1)

Removal of exposure lamp

(1)Enter the service mode.

(2)Perform 

F8-00

(3)Remove top right cover. (2 screws)

1

(4)Remove two screws on the original guide

plate.

Note: When the conductive platen glass

is installed, the grounding plate

screw must also be removed.

(5)Remove platen glass with original guide

plate.

(1)Remove lamp stoppers (front/rear)

Note: A small flat blade screwdriver must be

used to remove the lamp holder spring

plates.

2

(1)Open the inverter case (2 screws).

(2)Disconnect the exposure lamp connector.

(3)Remove the exposure lamp connector

bracket (1 screw).

(4)Remove the exposure lamp bracket.

(5)Remove the exposure lamp.

3

3

3

4

4

1

1

Summary of Contents for FP-D350
























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands