Panasonic FP-D350 User Manual Download Page 556

Page: 556 / 663

6-30

Location

Procedure

Check

(1) Remove the Zip drive disk cover.

(2 screws)

(1) Install the support bracket to both

the Zip drive unit and the copier.

(3 screws)

(1) Connect the IDE signal harness

to IDE connector CN7 on the sys-

tem control PCB.

(2) Connect the IDE signal harness

to Zip drive.

(3) Connect the ground wire to the

support bracket.

(4) Connect the power supply har-

ness from the copier (located rear

side top left) to the Zip drive.

(5) Install the cable cover (metal). (2

screws)

(1) Reinstall the Zip drive cover.

(2) Install the support bracket cover.

(2 screws)

(3) Reinstall the top right cover.

Summary of Contents for FP-D350
























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FP-D350

Reviews:

Related manuals for FP-D350

Brands by name

Popular brands

Panasonic FP-D350, User Manual

Search results

Summary of Contents for FP-D350

Reviews:

Related manuals for FP-D350

Brands by name

Popular brands