90
VQT4W60
Troubleshooting Guide
ID3 tag of a MP3 file is not completely displayed.
¾
Only the track name (
[HDD]
[USB]
) and artist name (
[HDD]
)
can be displayed with this unit.
Cannot display DIRECT NAVIGATOR screen.
¾
This screen cannot be displayed during recording or copy
or while the unit is standing by for linked timer recording
with external equipment.
Still pictures (JPEG) do not playback normally.
¾
The images that were edited on the PC, such as
Progressive JPEG etc., may not playback. (
>
17)
Cannot record.
Cannot copy.
¾
You haven’t inserted a disc or the disc you inserted cannot
be recorded on. Insert a disc the unit can record onto.
(
>
15)
¾
[RAM]
[-RW‹V›]
[+R]
[+R]DL]
[+RW]
The disc is unformatted.
Format the disc. (
>
68)
¾
The disc is protected with the “DVD Management” settings.
(
>
68)
¾
Some programmes have limitations on the number of times
they can be recorded (CPRM). (
>
24, 92)
¾
The disc is full or nearly full. Delete unneeded titles (
[HDD]
[RAM]
[-RW‹V›]
[+RW]
) or use another disc. (
>
23, 47, 68)
¾
You cannot directly record to a DVD-R DL or +R DL disc on
this unit. Record to the HDD and then copy to the disc.
¾
Video cannot be recorded onto a DVD-R with still images
recorded on it.
¾
[-R]DL]
[+R]DL]
In the following situations, you cannot copy.
Delete unnecessary titles from the HDD and then copy.
– If there is not enough space available on the HDD (If you
will copy titles from the HDD to a blank disc and fill the
entire disc, HDD disc space equivalent to 4 hours of SP
mode recording is necessary).
– If the number of recorded titles and the number of titles to
be copied has exceeded 499. (
>
23, 47, 68)
¾
You cannot record and copy on finalised DVD-R, DVD-R
DL, DVD-RW (DVD-Video format), +R, +R DL discs.
However, you can record and copy again if you format
DVD-RW.
¾
If you repeatedly insert discs or turn the unit on and off
about 50 times or more, the recording or editing of DVD-R,
DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, and
+RW discs may be disabled.
¾
DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R
DL and +RW discs recorded on this unit may not be
recordable on other Panasonic DVD Recorders.
¾
This unit cannot record NTSC signals to discs that already
have PAL signal recordings.
(However, both types of programmes can be recorded onto
the HDD.)
Play of discs recorded with both PAL and NTSC on another
unit is not guaranteed. (
>
74)
¾
Some broadcasts are copyright protected. (
>
15, 24, 92)
Timer recording does not work properly.
¾
The timer programme is incorrect or different timer
programme times overlap. Correct the programme. (
>
31)
¾
The programme is not in timer recording standby. (“
F
” in
the timer recording list is not on.) (
>
31)
1
Press [PROG/CHECK].
2
Press [
3
,
4
] to select the programme and press the
“Red” button.
¾
The clock is not correct. Set the clock. (
>
14)
¾
The programme information in the GUIDE Plus+ system
may not be correct. It is recommended to modify the start
and end times to allow a margin of a few minutes. (
>
22)
Timer recording does not stop even when [
∫
] is
pressed.
¾
When using the linked timer recording with external
equipment, press [EXTLINK]. (“EXT-L” on the unit’s display
disappears.) (
>
28)
¾
If you start recording immediately after turning on the unit
while “Power Save in Standby” is not activated (Quick Start
mode), you cannot then stop recording for a few seconds.
¾
Make sure that the recording drive is selected. Press
[DRIVE SELECT] to select the recording drive. (
>
21)
Playback Issues
:
Music
Playback Issues
:
Still Pictures
Recording Issues
:
Recording/Timer
Recording/Copying/
External input
DMR-EX86EB_VQTXXXX-B.book 90 ページ ２０１３年３月６日 水曜日 午後４時２６分
