VQT4W60
11
STEP 2
1
Aerial cable to the “
RF IN
” on the digital satellite receiver.
2
RF coaxial cable from the “
RF OUT
” on the digital satellite receiver to the “
RF IN
” on the unit.
3
RF coaxial cable (included) from the “
RF OUT
” on the unit to the “
RF IN/AERIAL
” on the TV.
4
21-pin Scart cable from the “
AV/VCR
” on the digital satellite receiver to the “
AV2 (EXT)
” on the unit.
5
21-pin Scart cable from the “
AV1 (TV)
” on the unit to the “
AV
” on the TV.
6
21-pin Scart cable from the “
AV/TV
” on the digital satellite receiver to the “
AV
” on the TV.
Connect the unit directly to the television
If you connect the unit through an AV selector or video cassette recorder to the television, video signal will
be affected by copyright protection systems and the picture may not be shown correctly.
≥
When connecting to a television with a built-in VCR
Connect to the input terminals on the television side if there are both television and VCR input terminals.
Connect only after all other connections are complete.
After completing the above connections, proceed to the TV Tuning (
>
13).
Adding a Digital Satellite Receiver: Connecting to a Television and a Digital Satellite
Receiver
To view digital satellite programmes
Refer to “Watching Digital Satellite Programmes” (
>
19)
To record digital satellite programmes
Refer to “Recording from a Digital Satellite Receiver” (
>
28)
Digital satellite receiver
AV1(TV)
This unit
TV
RF IN/AERIAL
RF IN
AV2 (EXT)
RF OUT
RF IN
DISH INPUT
RF OUT
AV
AV/TV
AV/VCR
AV
HDMI IN
HDMI OUT
1
2
3
4
5
6
HDMI cable
HDMI AV OUT
HDMI IN
The RF coaxial cable cannot be
used for showing pictures from the
unit. The unit must be connected
using another method, e.g. 21-pin
Scart cable to show pictures from
the unit on the television set.
To the aerial
Digital satellite antenna
You can enjoy high-
quality picture by
adding the HDMI
cable connection
>
12
Connecting AC mains lead (included)
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even
when it is turned off.
[approx. 0.3 W (“Power Save in Standby” is activated and “RF OUT ( Aerial Signal )” is set to “Off”.)]
Television
VCR
This unit
DO NOT
This unit
AC IN
To household mains
socket
Additional Connections
1
10,
78
DMR-EX86EB_VQTXXXX-B.book 11 ページ ２０１３年３月６日 水曜日 午後４時２６分
