VQT4W60
89
Cannot switch audio.
¾
You cannot switch the audio in the following cases.
– When a DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL or +RW disc is in the disc tray while
DVD drive is selected.
– When the recording mode is XP and “Audio Mode for XP
Recording” is set to “LPCM”. (
>
73)
¾
When recording a digital broadcast with multiple audio
channels, this unit will record only the audio channel
selected in “DVB Multi Audio” in the on-screen display. The
audio channel cannot be switched during playback. (
>
67)
¾
You have used a digital connection. Set “Dolby Digital” to
“PCM” or connect using audio cables (analogue
connection). (
>
73, 79)
¾
There are discs whose audio cannot be changed due to
how the disc was created.
Play fails to start even when [
1
] (PLAY) is pressed.
Play starts but then stops immediately.
¾
Insert the disc correctly with the label facing up. (
>
18)
¾
The disc is dirty, scratched or marked. (
>
7)
¾
You tried to play a blank disc or a disc that is unplayable on
the unit. (
>
15, 16, 18)
¾
You tried to play a +RW that needs to be finalised on the
equipment used for recording.
¾
You may be able to copy a “One time only recording” title
that was recorded to DVD-RAM using a different Panasonic
DVD Recorder to this unit’s HDD, but play is not possible
due to copyright protection.
¾
When recording to DVD-RAM using EP ( 8 hours ) mode,
play may not be possible on DVD players that are
compatible with DVD-RAM. In this case use EP ( 6 hours )
mode. (
>
72)
¾
Make sure that the TV is turned on. If the menu or
messages are displayed, follow the on-screen instructions.
Audio and video momentarily pause.
¾
This occurs between playlist chapters.
¾
This occurs between chapters and with partially deleted
titles on finalised DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL and +RW that have been copied using
the high speed mode.
¾
This occurs as scenes change during Quick View (Play
k
1.3).
¾
[-R]DL]
[+R]DL]
When playing a title recorded on both layers,
the unit automatically switches between layers and plays
the title in the same way as a normal programme. However,
video and audio may momentarily cut out when the unit is
switching layers. (
>
15)
DVD-Video is not played.
¾
Ensure the DVD-Video region number for the disc is
correct, and the disc is not defective. (
>
Cover)
¾
You have set a ratings level to limit DVD-Video play.
Change this setting. (
>
72)
Alternative soundtrack and subtitles cannot be
selected.
¾
The languages are not recorded on the disc.
¾
You may not be able to use the on-screen menus to change
the soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (
>
20)
No subtitles.
¾
Subtitles are not recorded on the disc.
¾
Turn the subtitles on and select “Text” or the subtitle
number. (
>
66)
Angle cannot be changed.
¾
This function depends on software availability. Angles can
only be changed during scenes where different angles are
recorded.
You have forgotten your ratings PIN.
¾
With the tray open, press [DRIVE SELECT] to select the
DVD drive, then press and hold [
¥
REC] and [
1
/
a
1.3] on
the main unit simultaneously for about 5 or more seconds.
Quick View (Play
k
1.3) does not work.
¾
This does not work when audio is other than Dolby Digital.
¾
This does not work while recording in XP or FR mode.
The resume play function does not work.
¾
Memorized positions are cancelled when
– press [
∫
] several times.
– open the disc tray.
–
[CD]
[VCD]
[USB]
turn off the unit.
– execute a recording or timer recording.
The Video CD picture does not display properly.
¾
When connecting to Multi-system TV, select “NTSC” in “TV
System” in the Setup menu. (
>
74)
¾
When connecting to PAL TV, the lower part of the picture
cannot be displayed correctly during search.
Time Slip, Manual Skip, etc. does not work.
¾
These functions do not work with finalised discs.
¾
Time Slip does not work when the unit’s “TV System”
settings are different from the title recorded on the disc.
(
>
74)
Cannot see the beginning of the title played.
¾
(If connecting to a TV that supports VIERA Link with an
HDMI cable)
When [
1
] (PLAY) is pressed on this unit’s remote control,
you may not be able to see the beginning of the title played
until the picture is displayed on the TV. Using [
:
], return
to the beginning of the title.
Playback Issues
:
Sound (Continued)
Playback Issues
:
Operation
DMR-EX86EB_VQTXXXX-B.book 89 ページ ２０１３年３月６日 水曜日 午後４時２６分
