manualshive.com logo in svg

Panasonic DBS 824, Manual

Share
Download
Panasonic DBS 824 Manual Download Page 713

Call Forwarding

(CPC-S and CPC-M)

Call Forwarding allows users to send their calls to another extension, to an

outside line, or to voice mail The following table shows the call forwarding

features available

Table 

 

 Forwarding features

Feature

Call Forwarding--All Calls

Call Forwarding--No Answer

Call Forwarding--Busy

Call Forwarding--Busy/No Answer

Permanent Call Forwarding

Call Forwarding--All Calls 

When this feature is activated, all incoming

calls to an extension are forwarded immediately

Call Forwarding--No Answer 

When this feature is activated, an

unanswered call rings until the Call Forward No Answer timer expires When
the timer expires, the unanswered call is forwarded

Call Forwarding--Busy 

When this feature is activated, all incoming calls

to a busy extension are forwarded to a designated extension

Call Forwarding--Busy/No Answer 

When this feature is activated, all

incoming calls to an extension that is off-hook or does not answer are
forwarded to a designated extension Similarly, if the extension is busy, the
calls are forwarded to the designated extension

Permanent Call Forwarding 

Permanent call forwarding is assigned

through system programming Permanent call forwarding is usually used to
forward calls to a voice mail system

Extension users can invoke other forms of call forwarding (no answer, busy,
all calls) to override the permanent call forwarding destination

Permanent call forwarding can be used with busy, no answer, or busy/no

answer

Issued 

DBS 824-10-700

5-7

Summary of Contents for DBS 824








































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands