manualshive.com logo in svg

Panasonic DBS 824, Manual

Share
Download
Panasonic DBS 824 Manual Download Page 600

Key Telephone Features

Call Forwarding

Call Forwarding--No Answer 

When Call Forwarding--No Answer is

activated, an unanswered call will ring until the Call Forward No Answer
timer expires When the timer expires, the unanswered call is forwarded

Call Forwarding--Busy 

When Call Forwarding--Busy is activated, all

incoming calls to a busy extension will be forwarded

Call Forwarding--Busy/No Answer 

When Call Forwarding--Busy/No

Answer feature is activated, all incoming calls to an extension that is busy or
does not answer will be forwarded

Permanent Call Forwarding 

Permanent call forwarding is assigned

through system programming, rather than by the user Permanent call
forwarding is normally used to forward calls to a voice mail system

An extension user can invoke other forms of call forwarding (no answer,
busy, all calls) to temporarily override the permanent call forwarding
destination

Permanent call forwarding can be used with busy, no answer, or busy/no
answer

When Permanent Call Forwarding is assigned, the 

DSS 

and/or 

BLF 

keys are

not lit green, the 

 LED is off, and the second line of LCD displays do

not display the Call Forwarding assignment

To activate Call Forwarding

1

Press the 

ON/OFF 

key

l 

The phone issues intercom dial tone

l 

The ON/OFF LED lights

2 Dial “72 

“ENTER FWD CODE” appears on the display

3

Dial the appropriate call forwarding code

Call Forward

Code

 

I

 All

 0 I

 Busy/no answer 

 1 

 

I 

 

I

No answer

4

“ENTER FWD 

 appears on the display

Issued 

 

DBS 824-l O-700

3-11

Summary of Contents for DBS 824








































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands