Panasonic DBS 824, Manual

Page: 397 / 743

An Overview of Toll Restrictions FF7
Notes:
Operator Calls
Under the
old dialing plan,
operator calls for TRS types 3-6
are permitted if international calls are permitted system-wide
The Office Code Tables (FM are used to restrict all 0+ dialing, the next
two digits will also be analyzed (Operator calls are always restricted for TRS
types O-2
and always allowed for TRS type 7
Under the
new NANP dialing plan
operator calls can be allowed or restricted
on individual extensions (using FF7 as long as the extension uses a
trunk assigned TRS type 2-6 (Operator calls are always restricted for TRS
types 0 and 1 -- and always allowed for TRS type 7
Area Codes and Codes
Under
either dialing plan
outgoing calls on
trunks assigned TRS types 3-6 can be allowed or restricted based on the area
code and/or
code dialed When a number is dialed, the system first
checks
code combinations
entered in the “Special Area Code/
Office Code Tables” (FF7 and
If it doesn’t find any restrictions there,
the system then checks
the codes assigned to TRS types 2-6 as a group
-- if the system is programmed to use the new NANP dialing
plan If not (or if the system doesn’t find a match), it then checks the
individual area codes and office codes assigned to individual TRS types in
FF7
and
International Calling
Under
old dialing plan,
international calls are
allowed or restricted on a system-wide basis using the TRS type assigned to
the trunk Under
the new NANP dialing plan,
international calls on trunks
assigned TRS types 3-6 can be allowed or restricted on individual extensions
(FF7
Furthermore these extensions can also be programmed to
allow or restrict individual calls based on the Country Code dialed
and FF7
7-4
DBS 824-l O-400 Issued