Panasonic DBS 824, Manual

Page: 527 / 743

Auto Set Relocation System Features
l
When one auto mode is turned on, the mode cannot be reset by the
DAY/
NIGHT
key or
NIGHT2
key until 3 minutes after the
auto mode is activated (When both auto modes are set, the mode keys
cannot be used )
l
If mode keys are not assigned, the access codes
NIGHT2 toggle), (Day), (Nightl) and (Night2) can be
used instead
Auto Set Relocation
(CPC-S and CPC-M)
Description
Auto Set Relocation can be used to relocate the program settings of one
extension to another extension
Auto Set Relocation is commonly used when extension users want to trade
work areas For example, if Extensions “A” and “B” are going to switch
office locations, Auto Set Relocation enables them to switch telephone
settings without re-programming
Operation
Before a phone can be relocated, it must be assigned an Auto Set Relocation
code See “Related Programming” for the program address used to set up the
Auto Set Relocation Code
The following example illustrates how the program settings for extensions
200 and 300 could be switched
To Transfer Extension Settings from 200 to 300
At extension 200, pick up the handset
Press
Dial extension number 300
Enter the four-digit auto set relocation code assigned to extension 300
Replace the handset.
l
All programmed extension features, TRS, and LCR settings from 200
are transferred to 300
l-8
DBS 824-l O-700 Issue Date