manualshive.com logo in svg

Panasonic DBS 824, Manual

Share
Download
Panasonic DBS 824 Manual Download Page 547

Paging

System Features

Paging

(CPC-S and CPC-M)

Description

Internal paging is accomplished through the speakers of your system’s key
phones The Paging feature allows you to contact someone temporarily away
from an extension, give instructions to an entire group, or communicate with
several people at once If an external paging system is connected to your
system, pages can also be sent through its speakers

The Paging feature can also be programmed to time out after sixty seconds
When a page call times out, a busy tone is sent to the extension that initiated
the page

Operation

To use the Paging feature

Pick up the handset.

Press 

 then enter the number of the desired Paging Group (00-07)

The EXT LED lights

Make your announcement

Replace the handset.

Related Programming

l 

 (System) Page Duration

l

 (System) External Page Interface Control for Paging Groups

l 

FF3 (Extension) Page Group (O-7) Extensions

Hardware Requirements

l

External relays and an amplifier are required for external paging

Considerations

l-28

DBS 824-i O-700

Issue Date 

Summary of Contents for DBS 824








































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands