18
Useful Information
Handling and Maintenance
4. Remove the cover (B) and lift the expansion bus connector (C).
B
C
è
5. Remove the connectors on the built-in bridge battery (F), and then remove the screw (D)
and the circuit (E).
D
E
F
6. Pull out the built-in bridge battery with the sheet cover.
7. Open the sheet cover (G) and remove the built-in bridge battery (H). And confirm the
recycle mark of the built-in battery.
G
H
8. Insulate the connectors on the built-in bridge battery by covering them with plastic tape, for
example.
