Panasonic AW-HE870E, Operation Instructions Manual

Page: 19 / 604

- 18 (E) -
ENGLISH
w
Mounting the camera onto a pan-tilt head, tripod, camera mounting
bracket, or other part
1. Use the camera mounting screw holes (Inch screws: 1/4-
20UNC) to mount onto a pan-tilt head, tripod, camera
mounting bracket, or other part.
2. Attach the drop-prevention wire using the mounting
screw for wire (Inch screw: 1/4-20UNC) to the camera
mounting screw holes on the camera’s top surface when
mounting the camera with its bottom surface, or on the
camera’s bottom surface when mounting the camera
with its top surface.
When the unit is to be mounted onto a Panasonic pan-tilt
head, use the mounting screws and drop-prevention wire
that are supplied with the pan-tilt head.
When the unit is to be mounted onto a tripod, camera
mounting bracket, or other part, refer to pages 11 to 12,
and provide your own drop-prevention wire, mounting
screws, and washers.
Camera mounting screw holes
(Inch screws: 1/4-20UNC),
Depth: 10 mm
Camera mounting adapter
Preventing the camera from falling or coming
off
p
When attaching a camera to the pan/tilt head
(AW-PH360/AW-PH400/AW-PH405/AW-PH650),
follow the directions in the Operating Instructions to fix
the camera firmly in position.
In addition, link the camera to the pan/tilt head using
the drop-prevention wire and the mounting screws to
help ensure the camera does not fall.
p
When attaching the camera on any mounting or other
pan/tilt head (AW-PH360/AW-PH400/AW-PH405/
AW-PH650), check that the mounting can safely
bear the total mass of the camera, lens, connection
cables, etc., fix the camera firmly in position using the
prescribed tool, and take appropriate measures to
prevent the camera from falling.
Mounting
The connection and installation should be done by qualified service personnel
or system installers. Refer any servicing to qualified service personnel.