ANUP5204 Aicure
Installation
16
5. Installation
Install the Aicure ANUP5204 under the conditions above.
5-1. Installation Orientation
The Aicure ANUP5204 offers two orientations: a space-saving vertical illumination (upright) orientation,
and a horizontal illumination (sideways) orientation that allows stacking. You must change the
mounting orientation of the magnet inside the main unit, in accordance with the installation orientation.
See 4-1. Installing the Magnet (p. 10) for details.
Be sure to set the magnet in accordance with the installation orientation.
Mounting
the
magnet in a different position could cause the lamp to shatter, or shorten its lifetime.
5-2. Installation Conditions
1) Ambient temp.: 10 to 40
o
C
2) Relative humidity: No greater than 80%, with no condensation
3) Make sure the rubber legs are set horizontally parallel.
4) In order to avoid damage due to overheating, do not use if the area
around the system is blocked, or with two systems back to back.
5) The dimensions of the main unit are 165 x 200 x 325 mm
(LxHxD), but you should take the state of the unit with a light
guide fiber unit attached into account.
6) The minimum allowable bending radius for the light guide fiber
unit is 50 mm. Using the unit with a curve radius of less than 50
mm could damage it. Additionally, you should not touch the end
of the light guide directly with your bare hands. If it becomes
soiled, the level of UV light will be decreased.
Warning
