ANUP5204 Aicure
Irradiation
23
3
Press the up and down arrow buttons to change the value (%).
Press the up arrow button to increment the value.
Press the down arrow button to decrement the value.
Press and hold one of the buttons to speed the rate of
increase/decrease.
4
Press the "SET" button until you hear a beep (at least 1 second)
If this is the value you wish to set, press the "SET" button to
register it.
The "UV POWER" LED stops flashing, and lights solidly.
It is possible to adjust the UV intensity with the
shutter open. See the following page for details.
Starting Irradiation
On the operation panel, in the "SHUTTER" section, press the
"MANUAL OPEN/CLOSE" button until you hear a beep. The shutter
opens, and irradiation begins.
While the shutter is open, the "OPEN" LED in the "SHUTTER" section
is lit.
Ending Irradiation
During irradiation, press the "MANUAL OPEN/CLOSE" button again
until you hear a beep. The shutter closes, and irradiation ends.
Warning
