ANUP5204 Aicure
Operation via External Signals
35
Input
Pin
No.
Signal Name
I/O
Polarity
What the signal does
2 GND
G GND
6 GND
G GND
9 MANUAL
START Input
＋
When "Normal Mode" signal is being input,
opens shutter (irradiation).
When "Pattern Mode" signal is being input,
executes pattern 9.
10 GND
G GND
11 TIMER
START
Input
＋
If a single "Normal Mode" signal is input, timer
irradiation begins (if pulse is on for at least 0.3
sec.).
If a single "Pattern Mode" signal is input, one of
patterns 0 to 8 is executed (if pulse is on for at
least 0.3 sec.).
12 LAMP
START
Input
＋
Lamp is one while signal is being input
13 GND
G GND
14 IRIS
OPEN
Input
＋
Each time a single
"Normal Mode" signal
is input, the UV
intensity setting is
increased 0.5% (if
pulse is on for at least
0.3 sec./off for at least
0.3 sec.). [1]
15 IRIS
CLOSE
Input
＋
Each time a single
"Normal Mode" signal
is input, the UV
intensity setting is
decreased 0.5% (if
pulse is on for at least
0.3 sec./off for at least
0.3 sec.). [1]
"Pattern Mode" step
0-4 selection signal
(execute pattern 9).
See p. 36 for details.
[1] Setting range: 0.0 to 100%
・
When pins 14 and 15 are input simultaneously (at least 1 second), the UV intensity is 0.0%.
・
Pins 14 and 15 are invalid during timer irradiation.
Input pin
Contact rating 24 V
DC/4.5 mA or
greater
