ANUP5204 Aicure
Irradiation
22
8. Irradiation
After turning on the power, irradiation can be commenced once the lamp begins shining stably. This
chapter explains how to control irradiation using the operation panel. For details on controlling
irradiation via external signals, see 9. Operation via External Signals.
8-1. Manual Irradiation
Manually start and stop irradiation. The irradiation time can be changed at will. Before irradiation, set
and/or check the UV intensity setting.
Setting/Checking UV Intensity
1
On the operation panel, press the "UV POWER" button
until you hear a beep.
The "UV POWER" LED under the display lights, and the
current UV intensity setting appears in the display (in
percent). If you need to change the setting, follow steps 2
to 4, below, to set the UV intensity.
If the setting does not need to be changed, begin
irradiation in this state.
2
Press the "SET" button until you hear a beep. The "UV
POWER" LED begins to flash.
Warning
