ANUP5204 Aicure
Product Components
5
1. Features of the ANUP5204 Aicure
The ANUP5204 Aicure is an ultraviolet curing system that quickly hardens UV resins (inks, adhesives,
and coatings) via irradiation with ultraviolet light. Focused irradiation of UV resins coated on minute
surfaces (3 to 15 mm diam.) such as the lenses of CD, MD, and DVD players, and the LCD panels of
notebook PCs and the like, with UV radiation enables precise adhesion.
Automatically compensate for deterioration of UV intensity via the UV auto control
feature
This feature compensates for loss of UV intensity due to lamp wear. This maintains stable UV intensity
until the end of the lamp lifetime.
Pattern irradiation conforming to the resin/material to cure (programmable UV
irradiation)
Switching irradiation patterns with programmed UV intensities and irradiation time in keeping with the
qualities of the material to cure will prevent curing shrinkage, and warping in optical products and the
like.
Changing UV intensity externally
You can change the UV intensity externally as you like. You can also combine with the UV sensor to
perform UV light feedback control.
Digital display with no individual differences
Every item that requires it can be configured and displayed using easy-to-operate sheet switches. UV
radiation can be set in minute gradations, between 0 and 100%.
Counter feature
Automatically count the number of times the shutter opens. This can be used to count production
volume.
Long-life, one-touch replacement lamp
This 200 W lamp has a high 4,000 mW/cm
2
output. The lamp can be replaced with a single operation,
and does not require calibration of the light axis after replacement.
Free power source
Supports world-wide power: 100 to 240 V AC.
Support for vertical and horizontal use
Supports by vertical mode (vertical lamp type), with its smaller footprint, and the stackable horizontal
mode.
Features of the ANUP5204 Aicure
