Web Screen
-
110
-
[User mng.] screen
The users and personal computers (IP addresses) that can access the unit from personal computers are registered in the [User mng.]
screen.
The [User mng.] screen consists of [User auth.] tab and [Host auth.] tab.
[User auth.] tab
Click the [User auth.] tab of [User mng.] screen.
Configure the user authorization settings for the personal computers that can access the unit.
Up to 18 users can be registered.
NOTE
● If user authentication fails more than 8 times within a 30-second period from the same IP address (personal computer), access to
the unit will be disabled for a certain period.
___ indicates factory default settings.
Item
Setting value
Setting details
User auth.
On
Off
Set whether to perform user authorization.
On
Perform user authentication.
Off
Do not perform user authentication.
Authentication
Digest or Basic
Digest
Basic
Specify the method of user authentication to use.
The authorization configured here is used for authentication when
accessing the web screen. Digest authentication will always be used
for connection with the controller.
Digest or Basic
Use digest authentication or basic authentication.
Digest
Use digest authentication.
Basic
Use basic authentication.
●
If you change the [Authentication] setting, close the web
browser and perform access again.
User name
Enter the user name.
●
Maximum number of characters
1 to 32 half-size characters
●
Invalid characters
Full-size and half-size " : ; & \ symbols
●
If you enter a new name for a registered user and click the
[Set] button, the user information will be overwritten.
Password
Retype password
Enter the password.
●
Maximum number of characters
4 to 32 half-size characters
●
Invalid characters
Full-size and half-size " &