Picture monitor (PM)
-
38
-
Operation displays
The operation displays appear at the bottom of the screen for approx. 4 seconds when any of the following operations have been performed
with the operation panel of the ROP.
● Master gain change
● Electronic shutter change
● Lens extender change
● Scene file change
● REF LOAD is changed
● FILTER is changed
The display time can be changed from [MAINTENANCE] menu > [PM OPERATION STATUS] > [STATUS DISP TIME].
MASTER GAIN 12dB
Item
Display range
Remarks
MASTER GAIN
Setting values on
camera
The master gain value is displayed here.
● For the setting values, refer to the Operating Instructions for the camera.
SHUTTER
Setting values on
camera
The speed of the electronic shutter is displayed here.
● For the setting values, refer to the Operating Instructions for the camera.
LENS EXT
1.0
2.0
The magnification of the lens extender is displayed here.
● When the magnification of the lens extender is set to 2x, [2.0] is
displayed. Otherwise, [1.0] is displayed.
SCENE FILE
OFF
1 to 8
This indicates the scene file name.
REF LOAD
FACTORY
USER1 to USER3
REF1 to 3
This indicates the reference file that was loaded via reference call recalling.
FILTER
****
(ND/CC filter name)
The names of the ND filter/CC filters are displayed here.
