CCU menu
- 86 -
SYSTEM
This is the selection screen for the SYSTEM menu.
SYSTEM
INITIALIZE
FACTORY INITIALIZE
CCU CUSTOM DATA LOAD
CCU CUSTOM DATA SAVE CURRENT
ROP CONNECT SERIAL FRONT
NETWORK CONNECT
___ indicates factory default settings.
Item
Setting
value
Setting details
INITIALIZE
-
Return the menu items to the factory default values.
“Initialize the Unit Settings (INITIALIZE)” (see page 87)
FACTORY
INITIALIZE
-
Return the unit's settings to the factory default values.
When you place the cursor on [FACTORY INITIALIZE] and press the [SELECT] dial, [FACTORY
INITIALIZE? NO/YES] appears. Select [YES] to start initialization.
● Controls from the camera, ROP, or MSU cannot be performed during initialization.
CCU CUSTOM DATA
LOAD
-------
Call the CCU management data stored in the CCU.
CCU CUSTOM DATA
SAVE
CURRENT
FACTORY
CANCEL
Store the setting data managed by the CCU inside the CCU.
The items that are stored are the same as the items set with [FACTORY INITIALIZE].
CURRENT
Saves the values currently set for the CCU.
FACTORY
Saves the values set with [FACTORY INITIALIZE].
ROP CONNECT
SERIAL
FRONT
REAR
-------
Displays the status of ROP connection (serial connection) to the unit.
FRONT
Connection is to the front panel [ROP] connector.
REAR
Connection is to the rear panel [ROP] connector.
-------
No serial connection.
ROP CONNECT
NETWORK
CONNECT
-------
Displays the status of ROP connection (IP connection) to the unit.
CONNECT
Connection is by IP connection.
-------
No IP connection.
