manualshive.com logo in svg

Panasonic AK-UCU600E, Operating Instructions Manual

Share
Download
Panasonic AK-UCU600E Operating Instructions Manual Download Page 88

CCU menu

- 88 -

SD CARD

This is the selection screen for the SD CARD menu.

     SD CARD

 DATA SAVE

 DATA LOAD          

 LOG FILE DOWNLOAD         

 

 UPDATE                    

 CARD FORMAT               

___ indicates factory default settings.

Item

Setting 

value

Setting details

DATA SAVE

-

Save the unit's setting information to memory card.

When you select this, the execution confirmation screen (NO?, YES?) appears.

DATA LOAD

-

Load the unit's setting information saved in memory card to this unit.

When you select this, the execution confirmation screen (NO?, YES?) appears.

LOG FILE 

DOWNLOAD

-

Save CCU (this unit) log information to memory card.

When you select this, the execution confirmation screen (NO?, YES?) appears.

UPDATE

-

Upgrade the unit's software or programs (FPGA) with files saved to the memory card.

When you select this, the execution confirmation screen (NO?, YES?) appears.

CARD FORMAT

-

Initialize the memory card.

When you select this, the execution confirmation screen (NO?, YES?) appears.

 

● Initialization may take about 5 minutes.

 

● Be sure to execute initialization after confirming the data because any data that is deleted by the 

initialization cannot be recovered.

Data Stored/Loaded

The following data is stored/loaded.

 

● Items in the [OPERATION] menu

 

● Items in the [MAINTENANCE] menu

(The [NETWORK] menu, [VERSION] menu, [SYSTEM] menu, and [SD CARD] menu are excluded.)

 

● Items in the [SYSTEM] menu

SD Card Error Messages

When an error occurs during processing of SD card menu items, the following messages are displayed.

Messages

Content and remedy

LOAD ERROR

Unable to read from the memory card.

 

● Data written with other than this unit cannot be read.

WRITE ERROR

Unable to write to the memory card.

 

● The memory card is likely to be defective.

Replace the memory card.

Summary of Contents for AK-UCU600E









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands