Information display
This information is displayed on the picture monitor (PM).
Warning displays
The warning information is displayed when trouble is detected in the unit, camera, or optical fiber multi cable.
- W A R N I N G -
C A M R C V L V L N G
C C U R C V L V L N G
Warning information displayed is cleared when the status returns to normal.
To manually clear the warning information display, hold down the [CHARA] button of the ROP.
Information displayed
Display item
Description
CAM RCV LVL NG
The level of the optical signal received by the camera is low
CCU RCV LVL NG
The level of the optical signal received by the CCU is low
CAM FAN NG
Trouble with the cooling fan of the camera
CCU FAN NG
Trouble with the cooling fan of the CCU
CAM HIGH TEMP
The temperature of the camera is abnormally high
CCU HIGH TEMP
The temperature of the CCU is abnormally high
If you continue operation even with the message displayed, power supply to the camera may stop as
a protective measure.
CAM OVER TEMP
Due to overheating, the camera turned OFF automatically as a protective measure
OVER LOAD
The power supply circuit load to the camera exceeded 90%
POWER CONT ERROR
Trouble with the power supply circuit to the camera
CABLE OPEN
The optical fiber multi cable is not connected
CABLE SHORT
The optical fiber multi cable is shorted
The power supply voltage to the unit dropped momentarily
Power supply to the camera will stop as a protective measure.
Turn the unit off immediately, and determine and resolve the problem before turning it back on.
The camera is malfunctioning or startup of the camera failed for reasons other than the above.
FORMAT NG
The CAM mode and CCU mode do not match.
During data transfer
(CAM←→ROP)
Data transfer between the camera and ROP is in progress.
IRIS display
When the information is not displayed on the picture monitor, display it by pressing the [CHARA] button of the ROP.
- 29 -
Picture monitor (PM)
