C 1
M E M : F 5 . 6 F 4 . 8
- - - - - - - - - + - - - - - - - - - -
A
D
B
E
E
E
C
E
A. Camera number
B. IRIS F value
C. IRIS level
D. IRIS memory
E. TALLY INFO
Set each item to be displayed on the [PM VIEW SETTING] screen that can be accessed by selecting [MAINTENANCE] on the
CCU menu. However, this screen will not appear if the menu's [IRIS LEVEL] setting is [OFF].
The IRIS schedule is displayed as follows depending on the setting of [IRIS SCALE] that can be accessed by selecting
[MAINTENANCE] > [SETUP].
IRIS SCALE: FULL
F 4 . 8
C - - - - - - - - - + - - - - - - - - - O
C : C L O S E O : O P E N
IRIS SCALE: 2STOP
In the IRIS level display, the IRIS F value stored in IRIS memory is indicated at the center (+), and the current IRIS F value
is displayed relative to the center as "
".
When the center value (+) and the current IRIS value (
) overlap, the display shows "
".
F 4 . 8
- - - - - - - - - - - - - - - - - -
When the IRIS level falls outside either end of the display range, the status is displayed as a flashing "
" or "
".
F 4 . 8
- - - - - - - - - - + - - - - - - - - -
TALLY INFO (E)
Display the R tally in two segments of the upper row and the R, G, or YL tally in two segments of the lower row.
When all R, G, and YL tally signals are ON, the upper row is red, and the left and right segments of the lower row are
green and yellow, respectively.
When the R and G tally signals are ON, the upper row is red and the lower row is green.
Status displays
From the IRIS display screen, press the [CHARA] button of the ROP to display the “status display screen”.
However, when the “IRIS LEVEL” setting is “OFF”, the screen will be displayed first if the [CHARA] button of the ROP is pressed when the
information is not displayed on the picture monitor.
When the “status display screen” appears, pressing the [CHARA] button of the ROP again displays the status screen.
Pressing the [CHARA] button repeatedly switches display through the status screens in the sequence 1/5 → 2/5 → 3/5 → 4/5 → 5/5 → 1/5
….
- 30 -
Picture monitor (PM)