Front panel 3
3
5
2
6
7
1
4
1
[MENU] button
When you hold down the [MENU] button, the menu screen is displayed on the picture monitor
and the [MENU] button lights.
If you hold down the [MENU] button while the menu is displayed, the menu closes and the
[MENU] button turns off.
“Menu operations” (see page 37)
2
[SELECT] dial
This jog dial is for menu screen operations.
When the [SELECT] dial is turned clockwise, the cursor moves down; conversely, when it is
turned counterclockwise, the cursor moves up.
Press the [SELECT] dial to select the menu items.
“Menu operations” (see page 37)
3
[USER1] and [USER2] buttons
These buttons are used for assigning functions.
Function assignments are selected using [SETUP] in the CCU menu.
The following functions are pre-assigned at the factory.
[USER1] button: CHARA
[USER2] button: LOCK
“SETUP” (see page 80)
4
[ROP FRONT/REAR] selector
switch
This switch switches between the [ROP] connectors on the front and rear panels.
This is enabled when [MAINTENANCE] > [SETUP] > [ROP SW] is set to [SWITCH SELECT] in
the CCU menu.
“ROP SW” (see page 81)
5
[ROP] connector (front)
This connector is for connecting a ROP (sold separately).
6
Memory card slot
Insert a memory card (sold separately).
A memory card can be used to set this unit.
“SD CARD” (see page 88)
7
Memory card access lamp
This is lit while the memory card is being accessed.
- 23 -
Parts and their functions
