Panasonic AK-HRP200G, Operating Instructions Manual

Page: 15 / 44

14 15
Parts and their functions (when operating a studio handy camera)
(continued)
CAMERA
No.
DATA
SET
DISPLAY SELECT
UP
DOWN
SET UP
ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTE EXIT SAVE/LOAD
SHIFT
+
UP+DOWN
27 30
22
35
37
25
26 29 32
24
23
28 33 34 31
36
22.
DATA SET button <UP>
Use this button to increase set values when ND filter/CC filter,
M.GAIN or SHUTTER/SYNCHRO is displayed. Each press of the
button increases the set value.
On: Enabled
Off: Disabled
<Note>
• The CC filter cannot be used on the AK-HC3800 studio handy
camera.
• Simultaneously pressing the DATA SET button <UP>, DATA SET
button <DOWN>, and Scene/User File selector button <SHIFT> for
about 2 seconds switches to setup mode.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
23.
DATA SET button <DOWN>
Use this button to decrease set values when ND filter/CC filter,
M.GAIN or SHUTTER/SYNCHRO is displayed. Each press of the
button decreases the set value.
On: Enabled
Off: Disabled
<Note>
• The CC filter cannot be used on the AK-HC3800 studio handy
camera.
• Simultaneously pressing the DATA SET button <UP>, DATA SET
button <DOWN>, and Scene/User File selector button <SHIFT> for
about 2 seconds switches to setup mode.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
24.
Setting display (4 digits)
This function indicates settings.
It indicates IRIS values when the power is on. Pressing one of the
display select buttons displays the selected setting. It displays the
range of settings and standard position (default setting).
Item
Adjustable range
With the AK-HC3800
Display
Standard
position
IRIS _ ■■■
ND 1 to 4
1: Clear
2: 1/4
3: 1/16
4: 1/64
■ ___ 1
CC Not supported by the
AK-HC3800.
_ ■ __ A
M.GAIN −3 to 12 (in 3 dB steps), 18,
27, 36
• Depends on camera
setting.
■■ __ 0
M.PED From -99 to 0, 0 to 12
_
■■■ 0
SHUTTER - At 59.94 Hz
STEP: 1/100 to 1/2000
SYNCHRO: 61.7 to 6130
- At 50 Hz
STEP: 1/60 to 1/2000
SYNCHRO: 51.5 to 6250
■■■■ -
<Note>
Adjustment range and standard position vary depending on the
connected camera.
25.
IRIS display <IRIS>
This display is lit green when an IRIS setting is displayed on the
setting display.
The IRIS value is displayed when the power is turned on.
Also, when the Iris lever is operated while something other than IRIS
is displayed on the setting display, the IRIS value will be displayed for
about 2 seconds.
26.
ND filter/CC filter DISPLAY SELECT button <ND/CC>
SAVE/LOAD button <SAVE/LOAD> (In setup mode)
Press this button to display and change set values for the ND or CC
filters.
On (yellow): Displays the ND filter and CC filter settings
Off:
Displays settings other than the ND filter and CC filter
settings
<Note>
The CC filter cannot be used on the AK-HC3800 studio handy
camera.
z
Setting and displaying the ND filter and CC filter
1) Press <ND/CC> when IRIS display or another (M.GAIN/
M.PED or SHUTTER) display is selected.
The button lights and the ND filter display <ND> lights green.
(However, when the ND filter or CC filter is not at the standard
position, the display always lights yellow)
2) Press the lit DATA SET button <UP> <DOWN>.
This allows you to change the ND filter setting.
3) Press <ND/CC> again.
The ND filter display <ND> goes off, the CC filter display <CC>
lights green and the setting display indicates the CC setting.
Press the lit DATA SET button <UP> <DOWN> to change the
CC filter setting.
Since the AK-HC3800 is not equipped with a CC filter function,
a bar display appears.
4) Press <ND/CC> again.
The button goes off and the ND filter display <ND> and CC
filter display <CC> go off. (However, when the ND filter or CC
filter is not at the standard position, the display stays yellow)
Then the setting display returns to IRIS indication.
Pressing another DISPLAY SELECT button (<M.GAIN/M.PED>
or <SHUTTER>) turns off the button and lights the selected
button.
In setup mode, use it to switch submenus.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
27.
ND filter display <ND>
The setting display lights green when ND filter settings are displayed.
When the ND filter setting is not at the standard position, the setting
display always lights yellow regardless of what it shows.
(Standard position: 1)
28. CC filter display <CC>
The setting display lights green when CC filter settings are displayed.
When the CC filter setting is not at the standard position, the setting
display always lights yellow regardless of what it shows.
(Standard position: A)
<Note>
The CC filter cannot be used on the AK-HC3800 studio handy
camera.