96
Editing: Preparing for Playlist Creation
This sets the presence of mix recording and recorded audio
output required for recording voice-overs (
refer to “Recording
Voice-Overs” (page 111)
).
Use the following setup menus.
➝
For details on the menu, refer to “Setup” (page 173).
This section describes how to delete a playlist and prepare a
new playlist.
1
Set the items in “Preparing for Playlist Creation”
(
➝
refer to page 94
).
2
Press the PLAY LIST button to open the playlist
screen.
3
Press the MENU button.
4
Use the cursor buttons to choose [FILE] – [NEW] and
press the SET button.
◆
NOTE:
• Pressing the NEW (SHIFT + RESET) button has the same effect
as choosing [FILE] – [NEW].
5
Select [YES] and press the SET button.
This registers an event where the start of the clip is the IN
point and its end is the OUT point.
Use the steps below to name playlists.
1
Press the PLAY LIST button to open the playlist
screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [OPERATION] –
[CHANGE PLAYLIST NAME] and press the SET
button.
4
Use the on-screen keyboard to enter a name and
press [OK].
5
Close the menu to register the name in [PLAYLIST
NAME].
Setting up voice-over recording
No.793
A DUB PB MIX
No.797
A DUB MONI
Creating a New Playlist
Naming Playlists
