Panasonic AJ-HPD2500P Operating Instructions Manual Download

Page: 79 / 236

Clip Management: Formatting P2 Cards

Cl
ip
Man

age

men

Formatting P2 Cards

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[FORMAT] – [SLOT n] (the number of the P2 card

slot containing the card to format) and press the SET

button.

Select [YES] and press the SET button.

The card is now formatted.

◆

NOTE:

• To cancel formatting, select [NO] and press the SET button.

Press OK (SET button) when the completion

message appears.

◆

NOTE:

• Repeat the procedures in steps 3 to 5 to format P2 cards in other

P2 card slots or SD memory cards.

Press the MENU button to end processing.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[FORMAT] – [ALL P2] and press the SET button.

Select [YES] and press the SET button.

The card formatting starts.

◆

NOTE:

• To cancel formatting, select [NO] and press the SET button.

Press OK (SET button) when the completion

message appears.

Press the MENU button to end processing.

Formatting Individual P2 Cards

Formatting All P2 Cards

Summary of Contents for AJ-HPD2500P













































































































































































































































Search results

Summary of Contents for AJ-HPD2500P

Reviews:

Related manuals for AJ-HPD2500P

Brands by name

Popular brands

Panasonic AJ-HPD2500P, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500P

Reviews:

Related manuals for AJ-HPD2500P

Brands by name

Popular brands