66
Clip Management: Copying Clips
Copying Clips
Clips can be copied to a P2 card in any slot, a hard disk or FTP
server.
◆
NOTE:
• Take care not to turn off the power or remove a card during copying.
Otherwise the copied clip may become bad.
If the copied clip is bad, delete it and make a new copy.
• Reconnect incomplete clips before copying them.
1
Open the thumbnail screen.
2
Select a clip to copy.
3
Press the MENU button.
4
Use the cursor buttons to choose [OPERATION] –
[COPY], select destination from the list that appears
and press the SET button.
When multiple clips are selected, the number of selected
clips appear after pressing the SET button.
When copying to a hard disk or FTP server, select the
destination of the copied data as required.
Hard disk and FTP server details:
➝
Refer to “Using This Unit With a Hard Disk” (page 126).
➝
Refer to “Connecting This Unit to a Network” (page 139).
5
Select [YES] and press the SET button.
This starts copying.
◆
NOTE:
• To interrupt copying, press the SET button or the CANCEL
(SHIFT + EXIT) button to cancel the operation.
The incomplete copy at the destination is deleted.
• “OVER WRITE” appears when an attempt is made to place a
copy (having the same GLOBAL CLIP ID) at a destination
already containing an identical item. Select [YES] to overwrite or
[NO] to cancel copying and then press the SET button.
6
Press OK (SET button) when the completion
message appears.
◆
NOTE:
• No copying is performed when any of the following error
messages appear.
– [LACK OF REC CAPACITY]
Copy failed because there is not enough space at the copy
destination.
– [UNKNOWN CONTENTS FORMAT!]
Copy failed because the selected clip was bad.
– [NO COPY TO SAME CARD!]
Copy failed because an attempt was made to place the copy
on the same disk.
– [TOO MANY CLIPS!]
Copy failed because too many clips were selected.
• Copying performed in the lower half of text memo display when
the text memo is selected copies the section from the selected
text memo to the next text memo. When there is no text memo
beyond the selected text memo, the section from the selected
text memo to the end of the clip is copied.
