Panasonic AJ-HPD2500P Operating Instructions Manual Download

Page: 137 / 236

Connections: External Remote Control

137

C
onn

ect
ion
s

External Remote Control

Use the RS-422A interface to send commands to an external

device to control it.

The following functions permit remote control.

• PLAY, STOP, SEARCH, FF, REW

• Counter and status LED indication

Press the PLAYER button.

This allows the unit to perform remote control of external

devices.

◆

NOTE:

• When performing remote control of external devices, set setup

menu No.25 (SYSTEM FREQ) to 59.94, 50, 23.98, 24, 29.97 or 25.

• Complete any settings required for controlling a remotely connected

device before switching.

In external control mode, the PLAYER lamp goes on and the

unit provides the following indications.

• The LED goes on to indicate external device status.

• Indicates the external device counter

• The unit is forcibly set to EE to enable reception of audio

and video from the external device

• Counter, status and P mark indications for the external

device are superimposed on the screen.

The control buttons listed below enable remote control of an

external device.

Remote Operation of External Devices

Setup Procedure

Indications during control of external
devices

Remote operation procedure

STOP

Sends the STOP command.

PLAY

Sends the PLAY command.

Sends the JOG, VAR or SHTL command.

REW

Sends the REW command.

Sends the FF command.

Dial

Sends the JOG, VAR or SHTL command.

COUNTER

Sends the switch COUNTER command

(CTL/TC only).

RESET

Sends the 0 reset command in CTL mode.

Summary of Contents for AJ-HPD2500P













































































































































































































































Search results

Summary of Contents for AJ-HPD2500P

Reviews:

Related manuals for AJ-HPD2500P

Brands by name

Popular brands

Panasonic AJ-HPD2500P, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPD2500P

Reviews:

Related manuals for AJ-HPD2500P

Brands by name

Popular brands