82
Editing: Playlist Function
Editing
Playlist Function
This unit allows the user to create a playlist that combines the
desired audio and video sections recorded on a P2 card. The
user can play back the clip sections on the playlist to check
what the created footage will look like after editing. Sections
of audio and video selected for playback are referred to as an
event and a list of such events is called a playlist. Editing
results can easily be checked since editing does not involve
any direct changes of clip data.
In normal playback, playback starts from the starting point
and goes on until the last clip.
Playlist playback continuously plays back only the required
clip sections.
Use the playlist mode to create playlists.
◆
NOTE:
• Playlists are stored in the playlist area of memory in this unit and can
always be accessed from the playlist screen. Playlists can also be
stored on a P2 card.
• Voice-overs can also be recorded. Since the audio data should be
saved to the same P2 card as the playlist, first save the playlist to a
P2 card.
• Do not use 24PN clips that have undergone nonlinear editing in a
playlist. Edit points may not be correctly recorded.
• Do not use and register multiple copies of the same clip since that
may result in incorrect recognition.
• Up to 100 events can be created per track.
• The maximum duration of a playlist is 23:59:59:29. (23:59:59:24 when
50, 25 or 60-25 is selected in setup menu No.25 (SYSTEM FREQ),
24:01:26.13 in drop-frame indication and 23:59:59:20 in 24PN)
P2
card 1
P2
card 2
Clip 1
Clip 2
Clip 3-1
Clip 3-2
Clip 4
Clip 5
Current position
Continuous playback
Continuous playback
P2
card 1
P2
card 2
Clip 1
Clip 2
Clip 3-1
Clip 3-2
Clip 4
Clip 5
IN OUT
IN OUT
IN OUT
Playlist playback
Event A
Event B
Event C
Event A
Event B
Event C
Continuous playback of events according to
playlist (when started from event A)
