- 60 -
This unit can record audio in 2 ch.
It is possible to switch to the built-in microphone of the camera head, microphone of the SDI output device, external
microphone, and connected audio device.
∫
About audio recording methods
The audio recording method varies depending on the [PRIORITY MODE] setting. (
Switching Audio Input
Audio is recorded with the built-in microphone of the camera recorder during the CAM Mode.
Audio can be recorded by using the microphone of the SDI output device or connecting an external microphone/audio
device during the SDI Mode.
Perform menu setup, and switch the audio input.
(During CAM Mode)
(During SDI Mode)
≥
The MIC/LINE IN terminal cannot be used during the CAM Mode.
≥
If you set [SDI MODE SEL] to [THROUGH] during SDI Mode, [AUDIO SELECT] cannot be set to [LINE], [MIC] or
[Plug-in Power Mic].
∫
Using an external microphone or audio equipment
Connect an external microphone or audio equipment to MIC/LINE IN terminals.
Audio Input
PRIORITY MODE
Audio recording method
REC/PB(4K)
Linear PCM (LPCM)
REC/PB
Dolby Audio
: [AUDIO INPUT]
#
[AUDIO SELECT]
#
desired setting
[INTERNAL MIC]:
Switches the audio input to the built-in microphone of the camera head.
[OFF]:
Audio input is not used.
[OFF]:
Audio input is not used.
[SDI]:
Audio input is switched to the audio of the SDI input.
[LINE]:
Audio input is switched to the audio device connected to the MIC/LINE IN terminal.
[MIC]:
Audio input is switched to the external microphone connected to the MIC/LINE IN
terminal.
[Plug-in Power Mic]:
Audio input is switched to the plugin power compatible external microphone connected
to the MIC/LINE IN terminal.
ヮユワヶ
A
MIC/LINE IN terminal
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 60 ページ ２０１７年５月２２日 月曜日 午後２時１１分
