Panasonic AG-UMR20P Operating Instructions Manual Download

Page: 235 / 260

- 235 -

During thumbnail and menu operation

Display

Description

Behavior and cause

NO DATA.

There are no clips in the currently
selected recording mode option and
recording format option.

≥

Select a recording mode option or
recording format option containing
recorded clips.

CANNOT DELETE.

The content versions do not match. This is
displayed when you try to delete clips
recorded with another device, for
example.

≥

Match the device and content version.

CARD ERROR.
PLEASE REFORMAT.

This is displayed when the SD card
cannot be formatted.

≥

Check the SD card.

≥

Replace the SD card in the card slot at
which the error has occurred.

UNABLE TO FORMAT.

Formatting is not possible due to, for
example, a problem with the SD card.

≥

Check the SD card.

Cannot delete data on
card.

The SD card cannot be formatted.

CANNOT PROTECT.

The content versions do not match. This is
displayed when you try to set protection
for clips recorded with another device, for
example.

≥

Match the device and content version.

CANNOT RESET
NUMBER.

The SD card cannot be used with this unit.

≥

Insert a recordable SD card.

THUMBNAIL RECOVERY
HAS FAILED.

This is displayed if the SD card is
removed or writing to the SD card fails
while recovery is in progress.

≥

Check the SD card.

THUMBNAIL DATA
ERROR IS DETECTED.

This is displayed when thumbnail
information is not recorded correctly.

≥

The applicable thumbnail information
will be recovered after this message
disappears.

Can not select more
clips.

The number of clips that can be selected
with this unit has reached the maximum
limit.

≥

Reselect clips after finishing the current
editing task.

SCENE FILE WRITE
FAILED

This is displayed if the SD card is
removed or writing to the SD card fails
while a scene file is being saved.

≥

Check the SD card.

During USB Device mode

Display

Description

Behavior and cause

DISCONNECT USB
CABLE.

An error has occurred while accessing the
SD card, or the OS is not supported.

≥

Check the SD card.

≥

Check to see if the OS is supported.

AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 235 ページ２０１７年５月２２日　月曜日　午後２時１１分

Summary of Contents for AG-UMR20P





































































































































































































































































Search results

Summary of Contents for AG-UMR20P

Reviews:

Related manuals for AG-UMR20P

Brands by name

Popular brands

Panasonic AG-UMR20P, Operating Instructions Manual

Search results

Summary of Contents for AG-UMR20P

Reviews:

Related manuals for AG-UMR20P

Brands by name

Popular brands