- 131 -
Also change the user names and passwords registered to the following.
Refer to the operating instructions provided with your product for further information about the settings used for your
product.
≥
Remote Camera Controller (AW-RP50, AW-RP120)
≥
Remote Operation Panel (AK-HRP200)
≥
Browsers and applications on computers, tablets, and smartphones.
Displaying the web screen
With a PC connected to the unit, it is possible to view the IP image of the Camera Head or the unit or select various
settings from the web browser.
Select an IP address for the personal computer within the private address range while ensuring that it is different from
the address of the unit. Set the subnet mask to the same address as the unit.
Unit’s IP address and subnet mask (factory settings)
IP address:
192.168.0.10
Subnet mask:
255.255.255.0
Range of private addresses:
192.168.0.0 to 192.168.0.255
≥
If the controller and web browser are being used at the same time, the content selected using the controller may not
be reflected on the web browser display. When using both the controller and web browser, be absolutely sure to
check the settings using the controller or camera menu.
≥
Some functions of the web setup screen are available only if you are using a Windows PC. (Not available for Mac)
≥
For Windows, it is necessary to install the viewer plug-in software “Network Camera View 4S” in advance to display
the IP image of the unit. (Not required for Mac)
For further details, refer to “Installing the plug-in viewer software” (
After changing the user name/password
The time zone screen and the clock setting screen are automatically displayed at the time of
purchase. It is necessary to set the time zone and clock on the unit before operating it from
the web screen. (
For the operating environment of a PC, refer to page
.
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 131 ページ ２０１７年５月２２日 月曜日 午後２時１１分
