background image

- 3 -

 indicates safety information.

Product identification marking

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock or product damage,

Do not expose this unit to rain, moisture, dripping or splashing.

Do not place objects filled with liquids, such as vases, on this unit.

Use only the recommended accessories.

Do not remove covers.

Do not repair this unit by yourself. Refer servicing to qualified service personnel.

CAUTION!

To reduce the risk of fire, electric shock or product damage,

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is 
well ventilated.

Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

Do not place sources of naked flames, such as lighted candles, on this unit.

CAUTION:

About using a headphone

Excessive sound pressure from earphones and headphones can cause hearing loss.

Listening at full volume for long periods may damage the user’s ears.

CAUTION:

Do not leave the unit in direct contact with the skin when in use.

Low temperature burns may result if the skin is left in direct contact with the high temperature parts of the unit 
or heated air from the ventilation openings of the unit.

CAUTION:

About using SD Card

Keep the Memory Card out of reach of children to prevent swallowing.

Product

Location

Memory Card Portable Recorder

Bottom

AC adaptor

Bottom

This unit is intended for use in moderate and tropical climates. (Southeast Asia, Middle East only)
This unit is intended for use in moderate climates. (Except Southeast Asia, Middle East)

AG-UMR20PJ.EJ(DVQP1321ZA)_E.book  3 ページ  2017年5月22日 月曜日 午後2時11分

Summary of Contents for AG-UMR20P





































































































































































































































































Reviews: